The use of stunt pegs on mountain bikes has been a topic that many people have questioned. The answer to this question is yes, but it depends on the purpose of the bike and how you want to use it.
A lot of riders will tell you that there are no stunt pegs for Mountain bikes because they do not work well with off-road riding.
But if you plan and decide to equip your mountain bike with pegs, then it will only be able to serve as a stationary stand for resting feet. It cannot carry the weight of other people or any load whatsoever.
Read More: 10 Best Mountain Bike Sunglasses: Protect Your Eyes On MTB Riding.
What Is A Stunt Peg? Is A Stunt Peg Necessary To Use On A Mountain Bike?
A stunt peg is an additional type of pedal that can be used on your bike, which will allow you to do tricks and stunts. This article will discuss what the uses for this are, how they are put together, and whether or not they are necessary to use on a mountain bike.
The first thing that should be discussed is whether or not it’s necessary to have one in order to ride a mountain bike. The answer here would be no, as long as you don’t plan on doing any tricks while riding it. If you’re just going to go out for a leisurely ride through the woods without much off-roading then there really isn’t any need at all for one of these pedals.
That being said, if you are someone who rides through bumps and jumps in the woods or mountain biking trails then a stunt peg can be a very good idea. They’re usually made of aluminum with steel pins that will help to make it last longer than your normal pedals would. The pedal is clipped on the bicycle shoe but they also come with a strap to keep your foot in place.
This all sounds good, but does it help riders do tricks? The answer is yes – if you’re an experienced rider then this will make it much easier for you to perform stunts on the bike without having to stop and bend over at the top of a jump or hill. This metal contraption will help you to quickly get back up and continue on with your ride.
Is There Any Benefit In Using Stunt Pegs On A Mountain Bike?
What are the benefits of using stunt pegs on a mountain bike? This is an important question.
The answer lies in what you want to do with your bike. If you want to be able to do tricks, then stunt pegs might just be what you need.
If not, then they won’t offer any benefit at all because they’re not needed for riding trails or simple stunts. The bottom line is that if it’s something that interests you and will help make your biking experience more fun, then go ahead and invest in some stunt pegs for your mountain bike!
Disadvantages Of Using Stunt Pegs On A Mountain Bike:
Stunt pegs are a type of pedal that sticks out from the bike’s rear wheel. They allow for easier grinding and sliding, as well as other tricks.
The disadvantages of using stunt pegs on a mountain bike is they can be difficult to use in tight spaces or when approaching corners at high speeds. Stunt pegs also put extra strain on the drive train, which could lead to more frequent chain failures and broken parts down the line.
The disadvantages of using stunt pegs on a mountain bike is they can be difficult to use in tight spaces or when approaching corners at high speeds. Stunt pegs also put extra strain on the drivetrain, which could lead to more frequent chain failures and broken parts down the line.
Stunt pegs are best for riders who are always on the move, and can’t stop for anything. They may be a good alternative to clipless pedals if you are not comfortable with them or don’t want all of that extra power just yet!
Another disadvantage of stunt pegs is they generally cost more than regular pedals. This is because most riders already have their own pedal cages.
How To Fit Stunt Pegs On A Mountain Bike?
This is the most common question people ask about stunt bikes. A lot of time, it seems like there are so many different pieces that you can’t figure out which one does what. But it’s really not as complicated as it looks when you take apart your bike and put everything back together again in the right order.
Here are some basic steps for fitting stunts onto a mountain bike:
- Remove all pedals from your bike frame by unscrewing them with an adjustable wrench or pedal spanner (a special bicycle tool). You’ll need to remove both left and right pedals in this step. If you don’t have a pedal spanner, any large, sturdy screwdriver will work.
- Screw the left pedal out from under your bike, turning it clockwise and pulling up on the spindle while you turn to loosen it.
- Screw in a new stunt peg by turning counterclockwise (lefty loosely). You’ll need two for each side of the bike.
- Screw the right pedal out from under your bike, turning it counterclockwise and pulling up on the spindle while you turn to loosen it.
- Attach a stunt peg by screwing clockwise tightly. You’ll need two for each side of the bike.
- Repeat steps one to four so that you have new pedals screwed on tight with your stunt pegs in the right place.
What Factors Would Allow Peg Installation On A Mountain Bike?
When you install a new peg, you need to consider some factors. On an MTB, pegs are less dangerous under the following conditions:
A Steel Frame
Compared to carbon and aluminum, steel can withstand more abuse. If you intend to ride, it is important to ensure your mountain bike has a steel frame.
Strong And Long Bolt-on Axles
Most mountain bikes use quick-release skewers, as mentioned earlier. You should change to longer and stronger bolt-on axles if you wish to put pegs on your mountain bike.
You can opt for 14mm BMX axles, which are the same thickness as mountain bike axles.
Switch To Single Speed
A mountain bike is, by default, a multi-speed bike. When it comes to stunt riding, the rear derailleur is a weakness. Most bikes used for trick riding are single-speeds if you have been attentive enough. To eliminate this weakness, replace the derailleur with a single-speed freewheel. Consider a BMX hub stronger than your MTB hub, such as the Dimart 36 Holes Metal Disc Rear Hub Set.
Rigid Chromoly Fork
Aluminum suspension forks aren’t designed to withstand lateral forces created by pegs. Therefore, a rigid Chromoly fork on an MTB is recommended if you intend to use pegs. Alternatively, you could avoid installing front pegs altogether.
High Bottom Bracket
The cranks may be unable to grind themselves properly if the bike’s bottom bracket is too low. This is why you need a high bottom bracket.
Hub Reinforced
If your MTB has a quick-release or through-axle skewer, a long bolt-on axle is required. Replace the hub with a reinforced one if you want to go further.
It is hard to find reinforced hubs in the aftermarket, but they are available. When a hub is reinforced, the impact will be limited from reaching discs and derailleurs.
Here is an article that I have written about MTB Nutrition: What To Eat Before, During, And After Your Ride?
Frequently Asked Questions (FAQs)
At this stage of the article, let’s see some FAQs, that people frequently ask about Putting Stunt Pegs On A Mountain Bike?
Can You Put Pegs on Any Bike?
Pegs cannot be installed on all types of bikes. BMX bikes are the best in this section. Stunt bikes are made to perform stunts and can withstand modifications like this. A high-end road bike is the next best option. You can also attach pegs to a mountain, track, and universal bike.
What Stunts Can I Perform With Pegs on My Mountain Bike?
The purpose of mountain bike pegs is threefold: to carry passengers, carry gear, and perform stunts. A passenger or luggage on an MTB is unlikely to damage it.
Can You Put Pegs on Quick-Release or Through-Axle Skewers?
The answer is yes, but it is not recommended. Through-axle skewers are much shorter than bolt-on skewers. This is not an ideal situation. A longer axle will provide a more stable base for the pegs. Try to avoid doing that while you can.
Conclusion:
If you want to be able to do tricks, then stunt pegs might just be what you need. If not, then they won’t offer any benefit at all because they’re not needed for riding trails or simple stunts.
The bottom line is that if it’s something that interests you and will help make your biking experience more fun, then go ahead and invest in some stunt pegs for your mountain bike!
Read more about Pegs at BMX Peg guide.
